Troubleshoot Windows 10 Freezing or Locking Up Randomly - E – mail tips and tricks

July 13, 2019
Troubleshoot Windows 10 Freezing or Locking Up Randomly
5 (100%) 1 vote

Method 1 – Update Drivers & BIOS

You’ve probably already tried this, but it’s still worth mentioning because it can definitely be the reason why Windows 10 is locking up. The main drivers you want to focus on updating are the graphics card, network card, audio and chipset drivers.

If you happen to have an NVidia graphics card, you really need to make sure you download the NVidia Control Panel program and keep it up to date. You don’t have to install all the other garbage that comes along with it, just the driver. Check out my previous post on automatically updating your Windows drivers.

Also, if you have Windows installed on an SSD, be sure to update the firmware for the SSD. For example, if you have a Crucial SSD, you can download their storage executive software to do this for you.

Some users have had this issue with hardware that simply doesn’t have a Windows 10 driver. If that’s the case for you, the best option would be to disable the device or replace it with a newer version. For example, if you have a really old WiFi card and there simply isn’t a Windows 10 driver, try disabling it via Device Manager or the BIOS and see if the freezing goes away.

Finally, you should update your BIOS in a situation like this. Normally, I don’t recommend updating the BIOS if everything is working fine, but it’s a good idea when something is wrong. Check out my post on determining whether or not you can update the BIOS.

Method 2 – Uninstall Incompatible Programs

I’m pretty sure this was my problem because I really didn’t have any issues in Windows 10 for months until I installed a few new programs. Some of the programs were used to scan and/or modify my hardware (Speccy, Acronis True Image, f.lux, etc.), which might have started causing the freezing.

However, any program can cause this issue, so go through any new programs you may have installed and try to uninstall them to see if that fixes the problem.

Method 3 – Disconnect All Devices

It can be the case that Windows 10 is not causing the problem, but some external device is. A good way to test this is to disconnect any and all devices from the computer and then boot up.

You should disconnect all USB devices, including the mouse and keyboard. I would suggest getting a different mouse and keyboard and trying that just to rule out external devices completely before moving on.

Method 4 – Check for Faulty Hardware

This one is a little harder to detect and usually harder to fix too. If there is anything wrong with the hardware, you should see the problem with any other version of Windows you have installed. If you only have Windows 10 installed, you’ll need to perform a hardware test.

You’ll want to check out my posts on diagnosing problems with memory and checking your hard drive for errors. Also, you’ll want to access your BIOS and check to see if there is any kind of hardware test you can run from there. Usually, there is an option like Diagnostics or something similar.

Be sure to also check the CD/DVD/Blu-ray drive as that is commonly overlooked, but can definitely cause problems in Windows.

Method 5 – Adjust Paging File

If you happen to notice that the problem only occurs when you are copying or moving large files or doing anything that requires extensive use of the hard disk, then the issue could be related to the paging file.

This is especially true if you are using an SSD on your system. You can check the paging file by going to Control Panel, then System, clicking on Advanced System Settings, clicking on the Advanced tab, then clicking on Settings, clicking on the Advanced tab again, then clicking Change under Virtual Memory.

In a previous article, I give some tips on optimizing the paging file, which in most cases I would recommend, but for this issue, I suggest you keep the paging file on the same partition as the Windows OS and allow Windows to automatically manage the size of the paging file.

Method 6 – Disable Overclocking

If you have a high-end machine with a high-end CPU, your BIOS settings might be causing Windows to freeze. It’s best to turn off any overclocking or automatic CPU adjustments.

On some CPU’s, you should look into whether or not the C6 state is enabled or not. This feature tries to put the CPU in a low power code, but it can cause more problems. Basically, go into the BIOS and make sure everything is set to the default for clock speeds, voltage, etc.

The same thing applies for any DRAM modifications. Set everything back to default or automatic and see what happens.

Method 7 – Power Settings

This option will probably only help those who have a PCIe graphics card installed on their system. Go to Control Panel, then Power Options and make sure you are using the High Performance plan first.

If so, then click on Change plan settings and then Change advanced power settings.

Scroll down until you see PCI Express and then expand Link State Power Management. Make sure that it is set to Off.